Sip server: sip.cleartalk.com.au
Port: 5060
Codec: G729a
Outbound proxy: (none)
SIP Userid: (your cleartalk phone number)
Authid: (same as above)
Auth password / Password: (your clear talk password)
If you have Linksys hardware you can enter a Dialing plan allowing auto detection of local area codes etc.
(10xS0|*xxS0|13[1-9]xxxS0|1300xxxxxxS0|1800xxxxxxS0| 000S0|0011xxxxxx.|[2-9]xxxxxxxS0|0[2-9]xxxxxxxxS0|xx.)
If you use Linksys hardware you can also change the device tones to sound similar to Australian phones.
(usually found on the regional tab)
Call Progress Tones
Dial Tone: 400@-19,425@-19,450@-19;10(*/0/1+2+3)
Busy Tone: 425@-19;10(.375/.375/1)
Re-Order Tone: 425@-19,425@-29;60(.375/.375/1,.375/.375/2)
Ring Back Tone: 400@-19,425@-19,450@-19;*(.4/.2/1+2+3,.4/2/1+2+3)
Distinctive Ring Patterns
Ring1 Cadence: 60(.4/.2,.4/2)
|
